S3 Series
http://www.squadselectseries.com/s3forum/

Frame 2 Planning Target Selection
http://www.squadselectseries.com/s3forum/viewtopic.php?f=6&t=3665
Page 1 of 2

Author:  Coolon [ Tue Nov 09, 2021 1:47 pm ]
Post subject:  Frame 2 Planning Target Selection

If no one steps up, I will choose a target and make a basic plan.
Should someone like to lead I will support best I can.

Author:  Coolon [ Tue Nov 09, 2021 5:47 pm ]
Post subject:  Re: Frame 2 Planning Target Selection

Targets are listed by Muzz:
Port 61

SAF 111
OIL 91
RAIL 121

Attachments:
mid channel.png
mid channel.png [ 506.41 KiB | Viewed 16108 times ]
north sea target.png
north sea target.png [ 257.29 KiB | Viewed 16108 times ]

Author:  Coolon [ Wed Nov 10, 2021 1:41 am ]
Post subject:  Re: Frame 2 Planning Target Selection

Possible bomb runs for F 061
scouting Imagery

Attachments:
F061overview.JPG
F061overview.JPG [ 166.29 KiB | Viewed 16104 times ]
F061bombrun.JPG
F061bombrun.JPG [ 273.92 KiB | Viewed 16104 times ]

Author:  split [ Wed Nov 10, 2021 4:50 am ]
Post subject:  Re: Frame 2 Planning Target Selection

Thanks for the Nice intel!
<S>

Author:  Coolon [ Thu Nov 11, 2021 1:20 am ]
Post subject:  Re: Frame 2 Planning Target Selection

Airfield F111

Attachments:
F111bombrun.png
F111bombrun.png [ 1.67 MiB | Viewed 16097 times ]

Author:  Coolon [ Thu Nov 11, 2021 3:45 pm ]
Post subject:  Re: Frame 2 Planning Target Selection

ok I'll do it... F111 for Frame 2

Author:  split [ Fri Nov 12, 2021 11:00 pm ]
Post subject:  Re: Frame 2 Planning Target Selection

Thanks for stepping up coolon!
If all bomber pilots have their run assigned and have your map or similar, this should be easily doable. Last frame some one dropped just before me on my allotted targets which wasted half my bombs.
<S>

Author:  Muzz [ Sat Nov 13, 2021 4:09 am ]
Post subject:  Re: Frame 2 Planning Target Selection

If you check the .show, ack is not required for closure.

Author:  Coolon [ Sat Nov 13, 2021 5:46 pm ]
Post subject:  Re: Frame 2 Planning Target Selection

how does one discern the AA is not required for closure based on the info shown on .show?

Author:  split [ Sun Nov 14, 2021 3:56 am ]
Post subject:  Re: Frame 2 Planning Target Selection

I don't know this to be true, but looking at .show in the online S3 arena just now this is what I see:
for targets scroll down a fair amount and you will see OT_88Flack 0 0 1 and OT_MG 0 0 1 . But look at structures that we know have to go down and you see OT_xxxxxxx 1 0 1 . Notice the difference, 0 0 1 for ack/mg and 1 0 1 for stuff that apparently needs to go down. 0's and 1's turn things on and off. The first 1 must mean destruction for closure is turned on for that object.
That's my somewhat educated guess. :lol:
<S>

Page 1 of 2 All times are UTC
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group
http://www.phpbb.com/